matlabsobel算子代码(matlab常用算法的代码)
admin 发布:2022-12-19 20:44 179
本篇文章给大家谈谈matlabsobel算子代码,以及matlab常用算法的代码对应的知识点,希望对各位有所帮助,不要忘了收藏本站喔。
本文目录一览:
急求 sobel算子检测边缘 Matlab程序代码
f=imread('peppers.png'); % 读入图像
f=rgb2gray(f); % 灰度转换
f=im2double(f); % 数据类型转换
% 使用垂直Sobel算子,自动选择阈值
[VSFAT Threshold]=edge(f,'sobel','vertical'); % 边缘探测
figure, imshow(f),title('Original Image'), % 显示原始图像
figure,imshow(VSFAT),title('Sobel Filter - Automatic Threshold'); % 显示边缘探测图像
%使用水平和垂直Sobel算子,自动选择阈值
SFST=edge(f,'sobel',Threshold);
figure,imshow(SFST),title('Sobel Filter (Horizontal and Vertical)'); % 显示边缘探测图像
%使用指定45度角Sobel算子滤波器,指定阈值
s45=[-2 -1 0;-1 0 1;0 1 2];
SFST45=imfilter(f,s45,'replicate');
SFST45=SFST45=Threshold;
figure,imshow(SFST45),title('Sobel Filter (45 Degree)'); % 显示边缘探测图像
%使用指定-45度角Sobel算子滤波器,指定阈值
sm45=[0 1 2;-1 0 1;-2 -1 0];
SFSTM45=imfilter(f,sm45,'replicate');
SFSTM45=SFSTM45=Threshold;
figure,imshow(SFSTM45),title('Sobel Filter (-45 Degree)'); % 显示边缘探测图像
求MATLAB代码
MATLAB实用源代码
1图像的读取及旋转
A=imread('');%读取图像
subplot(2,2,1),imshow(A),title('原始图像');%输出图像
I=rgb2gray(A);
subplot(2,2,2),imshow(A),title('灰度图像');
subplot(2,2,3),imhist(I),title('灰度图像直方图');%输出原图直方图
theta = 30;J = imrotate(I,theta);% Try varying the angle, theta.
subplot(2,2,4), imshow(J),title(‘旋转图像’)
2边缘检测
I=imread('C:\Users\HP\Desktop\平时总结\路飞.jpg');
subplot(2,2,1),imshow(I),title('原始图像');
I1=edge(I,'sobel');
subplot(2,2,2),imshow(I1),title('sobel边缘检测');
I2=edge(I,'prewitt');
subplot(2,2,3),imshow(I2),title('prewitt边缘检测');
I3=edge(I,'log');
subplot(2,2,4),imshow(I3),title('log边缘检测');
3图像反转
MATLAB 程序实现如下:
I=imread('xian.bmp');
J=double(I);
J=-J+(256-1);%图像反转线性变换
H=uint8(J);
subplot(1,2,1),imshow(I);
subplot(1,2,2),imshow(H);
4.灰度线性变换
MATLAB 程序实现如下:
I=imread('xian.bmp');
subplot(2,2,1),imshow(I);
title('原始图像');
axis([50,250,50,200]);
axis on;%显示坐标系
I1=rgb2gray(I);
subplot(2,2,2),imshow(I1);
title('灰度图像');
axis([50,250,50,200]);
axis on; %显示坐标系
J=imadjust(I1,[0.1 0.5],[]); %局部拉伸,把[0.1 0.5]内的灰度拉伸为[0 1]
subplot(2,2,3),imshow(J);
title('线性变换图像[0.1 0.5]');
axis([50,250,50,200]);
grid on; %显示网格线
axis on; %显示坐标系
K=imadjust(I1,[0.3 0.7],[]); %局部拉伸,把[0.3 0.7]内的灰度拉伸为[0 1]
subplot(2,2,4),imshow(K);
title('线性变换图像[0.3 0.7]');
axis([50,250,50,200]);
grid on; %显示网格线
axis on; %显示坐标系
5.非线性变换
MATLAB 程序实现如下:
I=imread('xian.bmp');
I1=rgb2gray(I);
subplot(1,2,1),imshow(I1);
title(' 灰度图像');
axis([50,250,50,200]);
grid on;%显示网格线
axis on;%显示坐标系
J=double(I1);
J=40*(log(J+1));
H=uint8(J);
subplot(1,2,2),imshow(H);
title(' 对数变换图像');
axis([50,250,50,200]);
grid on; %显示网格线
axis on; %显示坐标系
4.直方图均衡化
MATLAB 程序实现如下:
I=imread('xian.bmp');
I=rgb2gray(I);
figure;
subplot(2,2,1);
imshow(I);
subplot(2,2,2);
imhist(I);
I1=histeq(I);
figure;
subplot(2,2,1);
imshow(I1);
subplot(2,2,2);
imhist(I1);
5. 线性平滑滤波器
用MATLAB实现领域平均法抑制噪声程序:
I=imread('xian.bmp');
subplot(231)
imshow(I)
title('原始图像')
I=rgb2gray(I);
I1=imnoise(I,'salt pepper',0.02);
subplot(232)
imshow(I1)
title(' 添加椒盐噪声的图像')
k1=filter2(fspecial('average',3),I1)/255; %进行3*3模板平滑滤波
k2=filter2(fspecial('average',5),I1)/255; %进行5*5模板平滑滤波k3=filter2(fspecial('average',7),I1)/255; %进行7*7模板平滑滤波
k4=filter2(fspecial('average',9),I1)/255; %进行9*9模板平滑滤波
subplot(233),imshow(k1);title('3*3 模板平滑滤波');
subplot(234),imshow(k2);title('5*5 模板平滑滤波');
subplot(235),imshow(k3);title('7*7 模板平滑滤波');
subplot(236),imshow(k4);title('9*9 模板平滑滤波');
6.中值滤波器
用MATLAB实现中值滤波程序如下:
I=imread('xian.bmp');
I=rgb2gray(I);
J=imnoise(I,'saltpepper',0.02);
subplot(231),imshow(I);title('原图像');
subplot(232),imshow(J);title('添加椒盐噪声图像');
k1=medfilt2(J); %进行3*3模板中值滤波
k2=medfilt2(J,[5,5]); %进行5*5模板中值滤波
k3=medfilt2(J,[7,7]); %进行7*7模板中值滤波
k4=medfilt2(J,[9,9]); %进行9*9模板中值滤波
subplot(233),imshow(k1);title('3*3模板中值滤波');
subplot(234),imshow(k2);title('5*5模板中值滤波 ');
subplot(235),imshow(k3);title('7*7模板中值滤波');
subplot(236),imshow(k4);title('9*9 模板中值滤波');
7.用Sobel算子和拉普拉斯对图像锐化:
I=imread('xian.bmp');
subplot(2,2,1),imshow(I);
title('原始图像');
axis([50,250,50,200]);
grid on; %显示网格线
axis on;%显示坐标系
I1=im2bw(I);
subplot(2,2,2),imshow(I1);
title('二值图像');
axis([50,250,50,200]);
grid on;%显示网格线
axis on;%显示坐标系
H=fspecial('sobel');%选择sobel算子
J=filter2(H,I1); %卷积运算
subplot(2,2,3),imshow(J);
title('sobel算子锐化图像');
axis([50,250,50,200]);
grid on; %显示网格线
axis on;%显示坐标系
h=[0 1 0,1 -4 1,0 1 0]; %拉普拉斯算子
J1=conv2(I1,h,'same');%卷积运算
subplot(2,2,4),imshow(J1);
title('拉普拉斯算子锐化图像');
axis([50,250,50,200]);
grid on; %显示网格线
axis on; %显示坐标系
8.梯度算子检测边缘
用 MATLAB实现如下:
I=imread('xian.bmp');
subplot(2,3,1);
imshow(I);
title('原始图像');
axis([50,250,50,200]);
grid on; %显示网格线
axis on; %显示坐标系
I1=im2bw(I);
subplot(2,3,2);
imshow(I1);
title('二值图像');
axis([50,250,50,200]);
grid on; %显示网格线
axis on; %显示坐标系
I2=edge(I1,'roberts');
figure;
subplot(2,3,3);
imshow(I2);
title('roberts算子分割结果');
axis([50,250,50,200]);
grid on; %显示网格线
axis on; %显示坐标系
I3=edge(I1,'sobel');
subplot(2,3,4);
imshow(I3);
title('sobel算子分割结果');
axis([50,250,50,200]);
grid on; %显示网格线
axis on; %显示坐标系
I4=edge(I1,'Prewitt');
subplot(2,3,5);
imshow(I4);
title('Prewitt算子分割结果 ');
axis([50,250,50,200]);
grid on; %显示网格线
axis on; %显示坐标系
9.LOG算子检测边缘
用 MATLAB程序实现如下:
I=imread('xian.bmp');
subplot(2,2,1);
imshow(I);
title('原始图像');
I1=rgb2gray(I);
subplot(2,2,2);
imshow(I1);
title('灰度图像');
I2=edge(I1,'log');
subplot(2,2,3);
imshow(I2);
title('log算子分割结果');
10.Canny算子检测边 缘
用MATLAB程序实现如下:
I=imread('xian.bmp');
subplot(2,2,1);
imshow(I);
title('原始图像')
I1=rgb2gray(I);
subplot(2,2,2);
imshow(I1);
title('灰度图像');
I2=edge(I1,'canny');
subplot(2,2,3);
imshow(I2);
title('canny算子分割结果');
11.边界跟踪 (bwtraceboundary函数)
clc
clear all
I=imread('xian.bmp');
figure
imshow(I);
title('原始图像');
I1=rgb2gray(I); %将彩色图像转化灰度图像
threshold=graythresh(I1); %计算将灰度图像转化为二值图像所需的门限
BW=im2bw(I1, threshold); %将灰度图像转化为二值图像
figure
imshow(BW);
title('二值图像');
dim=size(BW);
col=round(dim(2)/2)-90; %计算起始点列坐标
row=find(BW(:,col),1); %计算起始点行坐标
connectivity=8;
num_points=180;
contour=bwtraceboundary(BW,[row,col],'N',connectivity,num_points);
%提取边界
figure
imshow(I1);
hold on;
plot(contour(:,2),contour(:,1), 'g','LineWidth' ,2);
title('边界跟踪图像');
12.Hough变换
I= imread('xian.bmp');
rotI=rgb2gray(I);
subplot(2,2,1);
imshow(rotI);
title('灰度图像');
axis([50,250,50,200]);
grid on;
axis on;
BW=edge(rotI,'prewitt');
subplot(2,2,2);
imshow(BW);
title('prewitt算子边缘检测 后图像');
axis([50,250,50,200]);
grid on;
axis on;
[H,T,R]=hough(BW);
subplot(2,2,3);
imshow(H,[],'XData',T,'YData',R,'InitialMagnification','fit');
title('霍夫变换图');
xlabel('\theta'),ylabel('\rho');
axis on , axis normal, hold on;
P=houghpeaks(H,5,'threshold',ceil(0.3*max(H(:))));
x=T(P(:,2));y=R(P(:,1));
plot(x,y,'s','color','white');
lines=houghlines(BW,T,R,P,'FillGap',5,'MinLength',7);
subplot(2,2,4);,imshow(rotI);
title('霍夫变换图像检测');
axis([50,250,50,200]);
grid on;
axis on;
hold on;
max_len=0;
for k=1:length(lines)
xy=[lines(k).point1;lines(k).point2];
plot(xy(:,1),xy(:,2),'LineWidth',2,'Color','green');
plot(xy(1,1),xy(1,2),'x','LineWidth',2,'Color','yellow');
plot(xy(2,1),xy(2,2),'x','LineWidth',2,'Color','red');
len=norm(lines(k).point1-lines(k).point2);
if(lenmax_len)
max_len=len;
xy_long=xy;
end
end
plot(xy_long(:,1),xy_long(:,2),'LineWidth',2,'Color','cyan');
13.直方图阈值法
用 MATLAB实现直方图阈值法:
I=imread('xian.bmp');
I1=rgb2gray(I);
figure;
subplot(2,2,1);
imshow(I1);
title(' 灰度图像')
axis([50,250,50,200]);
grid on;%显示网格线
axis on; %显示坐标系
[m,n]=size(I1);%测量图像尺寸参数
GP=zeros(1,256); %预创建存放灰度出现概率的向量
for k=0:255
GP(k+1)=length(find(I1==k))/(m*n);%计算每级灰度出现的概率,将其存入GP中相应位置
end
subplot(2,2,2),bar(0:255,GP,'g')%绘制直方图
title('灰度直方图')
xlabel('灰度值')
ylabel(' 出现概率')
I2=im2bw(I,150/255);
subplot(2,2,3),imshow(I2);
title('阈值150的分割图像')
axis([50,250,50,200]);
grid on; %显示网格线
axis on; %显示坐标系
I3=im2bw(I,200/255); %
subplot(2,2,4),imshow(I3);
title('阈值200的分割图像')
axis([50,250,50,200]);
grid on; %显示网格线
axis on; %显示坐标系
14. 自动阈值法:Otsu法
用MATLAB实现Otsu算法:
clc
clear all
I=imread('xian.bmp');
subplot(1,2,1),imshow(I);
title('原始图像')
axis([50,250,50,200]);
grid on; %显示网格线
axis on; %显示坐标系
level=graythresh(I); %确定灰度阈值
BW=im2bw(I,level);
subplot(1,2,2),imshow(BW);
title('Otsu 法阈值分割图像')
axis([50,250,50,200]);
grid on; %显示网格线
axis on; %显示坐标系
15.膨胀操作
I=imread('xian.bmp'); %载入图像
I1=rgb2gray(I);
subplot(1,2,1);
imshow(I1);
title('灰度图像')
axis([50,250,50,200]);
grid on; %显示网格线
axis on; %显示坐标系
se=strel('disk',1); %生成圆形结构元素
I2=imdilate(I1,se); %用生成的结构元素对图像进行膨胀
subplot(1,2,2);
imshow(I2);
title(' 膨胀后图像');
axis([50,250,50,200]);
grid on; %显示网格线
axis on; %显示坐标系
16.腐蚀操作
MATLAB 实现腐蚀操作
I=imread('xian.bmp'); %载入图像
I1=rgb2gray(I);
subplot(1,2,1);
imshow(I1);
title('灰度图像')
axis([50,250,50,200]);
grid on; %显示网格线
axis on; %显示坐标系
se=strel('disk',1); %生成圆形结构元素
I2=imerode(I1,se); %用生成的结构元素对图像进行腐蚀
subplot(1,2,2);
imshow(I2);
title('腐蚀后图像');
axis([50,250,50,200]);
grid on; %显示网格线
axis on; %显示坐标系
17.开启和闭合操作
用 MATLAB实现开启和闭合操作
I=imread('xian.bmp'); %载入图像
subplot(2,2,1),imshow(I);
title('原始图像');
axis([50,250,50,200]);
axis on; %显示坐标系
I1=rgb2gray(I);
subplot(2,2,2),imshow(I1);
title('灰度图像');
axis([50,250,50,200]);
axis on; %显示坐标系
se=strel('disk',1); %采用半径为1的圆作为结构元素
I2=imopen(I1,se); %开启操作
I3=imclose(I1,se); %闭合操作
subplot(2,2,3),imshow(I2);
title('开启运算后图像');
axis([50,250,50,200]);
axis on; %显示坐标系
subplot(2,2,4),imshow(I3);
title('闭合运算后图像');
axis([50,250,50,200]);
axis on; %显示坐标系
18.开启和闭合组合操作
I=imread('xian.bmp');%载入图像
subplot(3,2,1),imshow(I);
title('原始图像');
axis([50,250,50,200]);
axis on;%显示坐标系
I1=rgb2gray(I);
subplot(3,2,2),imshow(I1);
title('灰度图像');
axis([50,250,50,200]);
axis on;%显示坐标系
se=strel('disk',1);
I2=imopen(I1,se);%开启操作
I3=imclose(I1,se);%闭合操作
subplot(3,2,3),imshow(I2);
title('开启运算后图像');
axis([50,250,50,200]);
axis on;%显示坐标系
subplot(3,2,4),imshow(I3);
title('闭合运算后图像');
axis([50,250,50,200]);
axis on;%显示坐标系
se=strel('disk',1);
I4=imopen(I1,se);
I5=imclose(I4,se);
subplot(3,2,5),imshow(I5);%开—闭运算图像
title('开—闭运算图像');
axis([50,250,50,200]);
axis on;%显示坐标系
I6=imclose(I1,se);
I7=imopen(I6,se);
subplot(3,2,6),imshow(I7);%闭—开运算图像
title('闭—开运算图像');
axis([50,250,50,200]);
axis on;%显示坐标系
19.形态学边界提取
利用 MATLAB实现如下:
I=imread('xian.bmp');%载入图像
subplot(1,3,1),imshow(I);
title('原始图像');
axis([50,250,50,200]);
grid on;%显示网格线
axis on;%显示坐标系
I1=im2bw(I);
subplot(1,3,2),imshow(I1);
title('二值化图像');
axis([50,250,50,200]);
grid on;%显示网格线
axis on;%显示坐标系
I2=bwperim(I1); %获取区域的周长
subplot(1,3,3),imshow(I2);
title('边界周长的二值图像');
axis([50,250,50,200]);
grid on;
axis on;
20.形态学骨架提取
利用MATLAB实现如下:
I=imread('xian.bmp');
subplot(2,2,1),imshow(I);
title('原始图像');
axis([50,250,50,200]);
axis on;
I1=im2bw(I);
subplot(2,2,2),imshow(I1);
title('二值图像');
axis([50,250,50,200]);
axis on;
I2=bwmorph(I1,'skel',1);
subplot(2,2,3),imshow(I2);
title('1次骨架提取');
axis([50,250,50,200]);
axis on;
I3=bwmorph(I1,'skel',2);
subplot(2,2,4),imshow(I3);
title('2次骨架提取');
axis([50,250,50,200]);
axis on;
21.直接提取四个顶点坐标
I = imread('xian.bmp');
I = I(:,:,1);
BW=im2bw(I);
figure
imshow(~BW)
[x,y]=getpts
平滑滤波
h=fspecial('average',9);
I_gray=imfilter(I_gray,h,'replicate');%平滑滤波
求8方向的sobel算子在matlab中的源代码
int t0,t1,t2,t3,t4,t5,t6,t7;/////sobel模板的八个邻域值
int ab1,ab2,ab3,ab4,ma,ma1,ma2;
int m_max_ab=0;
if(m_Img_sobel!=NULL)
{
delete []m_Img_sobel;
m_Img_sobel=NULL;
}
m_Img_sobel=new unsigned char[aLineByte*aHeight];
if(m_iBitCount!=8)
{
// AfxMessageBox("sobel只处理灰度图,请先转换成灰度图");
return false;
}
else
{
for(int h=2;haHeight-1;h++)
{
for(int w=2;waWidth-1;w++)
{
if(*(aImg_zone+h*aLineByte+w)=150*(aImg_zone+h*aLineByte+w)=200)
{
m_max_ab=0;
t0=*(aImgData+(h-1)*aLineByte+(w-1));
t1=*(aImgData+(h-1)*aLineByte+(w));
t2=*(aImgData+(h-1)*aLineByte+(w+1));
t3=*(aImgData+(h)*aLineByte+(w+1));
t4=*(aImgData+(h+1)*aLineByte+(w+1));
t5=*(aImgData+(h+1)*aLineByte+(w));
t6=*(aImgData+(h+1)*aLineByte+(w-1));
t7=*(aImgData+h*aLineByte+(w-1));
ab1=(t0+2*t1+t2)-(t4+2*t5+t6);
if(ab10)
{
ab1=-ab1;
}
ab2=(t0+2*t7+t6)-(t2+2*t3+t4);
if(ab20)
{
ab2=-ab2;
}
ab3=(t0*2+t1+t7)-(t4*2+t3+t5);
if(ab30)
{
ab3=-ab3;
}
ab4=abs((t1+t2*2+t3)-(t5+t6*2+t7));
ma2=max(ab3,ab4);
ma=max(ab1,ab2);
if(ma0)
{
if(ma=255)
{
*(m_Img_sobel+h*aLineByte+w)=ma;
}
else
{
*(m_Img_sobel+h*aLineByte+w)=255;
}
}
else
{
*(m_Img_sobel+h*aLineByte+w)=0;
}
}
}
}
}
matlabsobel算子代码的介绍就聊到这里吧,感谢你花时间阅读本站内容,更多关于matlab常用算法的代码、matlabsobel算子代码的信息别忘了在本站进行查找喔。
版权说明:如非注明,本站文章均为 AH站长 原创,转载请注明出处和附带本文链接;
相关推荐
- 05-16设计师经常用的网站,设计师一般用什么网站
- 05-09网页代码,网页代码快捷键
- 05-06单页网站的代码(完整的网页代码)[20240506更新]
- 05-06个人主页图片代码(个人主页图片代码怎么弄)[20240506更新]
- 05-06提取微信名片代码(微信名片信息提取)[20240506更新]
- 05-06php后台权限管理代码(php管理员权限)[20240506更新]
- 05-06付费观看代码php(付费观看代码)[20240506更新]
- 05-06在线html执行代码(html怎么运行)[20240506更新]
- 05-06源代码管理资源管理器(资源管理器运行代码)[20240506更新]
- 05-06代码源软件库(程序代码库)[20240506更新]
取消回复欢迎 你 发表评论:
- 标签列表
- 最近发表
- 友情链接